Home remodeling is an exciting and horrifying thing to go through. Yes, you want everything to look as you want it to, but do you really want to go through the process to make it look that way? Probably not. My blog is all about surviving a renovation project in your home. You will learn tips that will make it an easier process for your entire family. I have even included some easy to follow instructions for creating a make-shift kitchen to help you survive kitchen renovations without getting to know the pizza delivery guy more than you should.
A common way that a roof will leak is due to faulty flashing located around items that protrude, such as the chimney and ventilation stack. That's why it is so important that your roof's flashing has been correctly installed. If you are replacing your roof, performing maintenance, or constructing a brand new home, make sure to follow these 3 flashing installation tips.
Selecting Flashing That You Can Braze or Solder
Flashing is typically made using metal, and several pieces of metal are joined together to create a continuous piece. What you may not realize is how the method used to connect the pieces plays a large part in how effective the flashing is. Brazing and soldering are two of the best ways to connect metal flashing, but the methods don't work on all kinds of metal. Four materials that are easy to braze or solder are:
It's common for other flashing materials to require an adhesive substance to bond the material together. This is not as effective, since the adhesive can break down over the years due to sun exposure and temperature changes. This is why you see brittle and cracked flashing on some homes.
Avoid Flashing Made With Aluminum
Aluminum flashing is often suggested due to its low cost, but the material has several qualities that make it not very desirable to use . Not only can the material not be brazed or soldered, but it needs mechanical fasteners and caulk. This will cause the flashing to not be as reliable as it could be.
Aluminum is also very susceptible to becoming corroded when it is used for flashing. This is because the chemicals used in brick chimneys have a high alkalinity level, which do not react well with aluminum flashing when it is touching it.
Paint Flashing That Can Rust
Galvanized and tin-coasted steal can potentially rust, but thankfully, it can be prevented by painting the material. The process starts with washing the flashing with a paint thinner or soap and hot water. This will remove the oil coating that was applied to the material during manufacturing. You then must apply a metal primer to the flashing so that the layer of paint will stick to it. Apply a second coat of paint after the first one dries, and the material shouldn't have any problems with rust.
Need help with replacing or installing flashing on your home? Contract a professional roofer in your area, such as Angle Ridge Remodeling, that can help.