surviving home renovation projects
About Me
surviving home renovation projects

Home remodeling is an exciting and horrifying thing to go through. Yes, you want everything to look as you want it to, but do you really want to go through the process to make it look that way? Probably not. My blog is all about surviving a renovation project in your home. You will learn tips that will make it an easier process for your entire family. I have even included some easy to follow instructions for creating a make-shift kitchen to help you survive kitchen renovations without getting to know the pizza delivery guy more than you should.


surviving home renovation projects

How To Apply Grout Like A Pro

Maykel Sloothaak

You can make your bathroom stand out with a custom tile job. Installing tile in a bathroom, whether it be on the floor, in the shower basin or on the countertop, is a great way to add some class and value to the room. If you have never laid tile before, the bathroom is a good place to start because there is less surface area in the smaller room. Tile installation is a multi-step process, but applying the grout is perhaps the most vital in a bathroom. Grout, when properly applied, is waterproof and mold resistant. Since water will get on all bathroom surfaces, it is important that you apply the grout properly.

Applying the Grout

A simple rubber grout float works best for applying the grout. This handheld tool allows you to scoop the grout out of the bucket and spread it deep into the grout lines. For a small bathroom job, you can save time and money by using premixed grout. Make sure you fill in the entire gap between each tile, but try to wipe away as much excess grout as possible with the float.

Wiping Away the Grout

The key to wiping away the grout is having a lot of water and a bunch of sponges. Have at least 3 5-gallon buckets of water and 6 or more sponges. You use these buckets to clean out the sponges as you wipe away the grout. Also, be sure to wear rubber gloves because the grout and water can dry out your skin very quickly. You want to thoroughly wring out the sponge before you start so it is just slightly damp. If the sponge is too wet, it will water it down the grout and make it runny. If the sponge is too dry, it will leave behind a rough grout line. Make sure the grout is a little bit lower than the top of the tile. At the same time, if your grout line is too sunken, it will be too noticeable and harder to clean. As you start the wiping, you will figure out how much water works best and how much pressure you need to apply while wiping away the grout.

Sealing the Grout

After you have allowed the grout to dry for a day or two, you need to seal it. Sealing the grout is very simple, but you need to use deep sealant which is fairly expensive. Basically, you pour the sealant onto the grout and all of the tile, and then spread it around with the rags. Then, you wipe it all up with dry rags. This is a simple yet vital step, especially when you are installing tile in a bathroom. To find out more, speak with a business like Christophers Bath and Kitchens.